For the industrial water treatment project in Russia, the customer selected 7 stainless steel bag filters to enhance the filtration efficiency of the circulating water.
In the circulating water treatment system of the industrial manufacturing base, the customer has long faced problems of unstable filtration efficiency and frequent filter bag replacements. The production line of this base has high requirements for the quality of circulating water, and the original filtration equipment had a rapid increase in pressure difference when processing large volumes of liquids, resulting in an increase in the number of shutdowns for maintenance, which affected the overall operation rhythm.
After comparing multiple options and evaluating the on-site conditions, the customer finally chose two 7-bag stainless steel bag filters, model JYMF-7P2. The equipment is made of SS304 stainless steel, with sandblasting treatment on the surface, a design pressure of 1.6 MPa, a working pressure of 1 MPa, inlet and outlet as DN250 flanges, side inlet and bottom outlet structure. It can well match the original pipeline layout on site.

Each filter unit can be equipped with 7 2# PP filter bags, with a filter bag size of 180×810mm, a filtration accuracy of 100 um, and a plastic inward folding design. Compared with the original equipment, the 7-bag structure significantly improves the single-unit filtration area and processing capacity. In large-flow circulating water conditions, it can maintain a relatively stable operating pressure difference and reduce the frequency of filter bag replacement.
The customer reported that after the equipment was put into operation, the overall filtration efficiency of the circulating water system was improved, the filter bag replacement cycle was extended, and the daily maintenance operation was also more convenient. Due to the use of standard DN250 flanges and side inlet and bottom outlet design, the on-site installation and connection were smooth, and no significant changes were made to the original pipeline.
The project manager stated that the selection of this 7-bag bag filter was mainly based on its SS304 stainless steel shell's corrosion resistance and structural strength, as well as the high throughput advantage brought by the multi-bag design. For industrial water treatment and chemical liquid filtration scenarios that require large flow and continuous operation, this type of equipment has good adaptability.

Currently, this equipment is operating stably at the customer's site. The customer also plans to promote the use of similar 7-bag stainless steel bag filters in other production lines to further improve the efficiency and stability of the overall liquid filtration system.
