Lab Test Use Small Plate Frame Filter Press Mini Manual Hydraulic Filter Equipment for Pharmaceutical Liquid Filtration
1.Ultra-compact structure:
The overall machine occupies an area of less than 0.5 square meters. Its height is suitable for standard laboratory bench dimensions, eliminating the need to reserve additional space for installing large equipment. It can be easily arranged even in a limited laboratory environment.
2.All stainless steel contact parts:
All the filter plates, flow channels and fasteners that come into direct contact with the materials are made of 304 food-grade stainless steel. They are corrosion-resistant and have no hygiene dead corners. After the experiment, they can be cleaned without any residue, meeting the requirements of clean experiments.
3.Manual hydraulic drive:
Equipped with a force-saving manual hydraulic pressing system, no external power or pneumatic power source is required. A single person can quickly complete the pressing and releasing operations of the filter plate, with an extremely low operational threshold.
4.Modular filter media compatible.
Supports quick replacement of filter cloths, filter papers and filter nets with different specifications ranging from 100 to 800 mesh. Can flexibly adjust the filtration accuracy according to different experimental requirements, and is suitable for various material characteristics.
5.Highly controllable pressure system
The filtration pressure is uniform and stable, the filter cake is formed uniformly, and the control accuracy of moisture content is much higher than that of conventional vacuum filtration equipment.
1.The experimental efficiency has been significantly enhanced.
Compared with the traditional vacuum filtration device, the single experimental duration has been shortened from 2 hours to within 20 minutes, with the experimental efficiency increasing by 6 times. It can complete multiple parallel control tests in a short period of time.
2.The data is highly reproducible.
The stable pressure output and standardized filter chamber structure enable the moisture content of the filter cake in 20 consecutive parallel experiments to be controlled within ±1.5%, fully meeting the rigorous requirements of scientific research projects for experimental data.
3.Low operating costs.
The structural design is simple and reasonable. The filter plates can be disassembled and the filter cloth can be replaced without the need for special tools. Daily cleaning and maintenance can be accomplished by ordinary laboratory personnel. The cost of consumables and maintenance for long-term use is extremely low.
4.High adaptability for process scaling.
The equipment precisely simulates the actual operating conditions of industrial plate-and-frame filter presses, and the experimental parameters produced can be directly used for the process calibration of subsequent industrial equipment, avoiding the problem of parameter mismatch during the pilot test phase.
5.Long service life:
The core components are made of thickened 304 stainless steel. Under normal usage conditions, there are no easily damaged or worn-out core parts. Even when in contact with weakly acidic or alkaline materials for a long time, there will be no problems such as rusting or leakage. The overall service life of the machine can reach more than 5 years.
|
1
|
Universities and Research Institutes Sludge dewatering experiments, solid-liquid separation process teaching and research testing in environmental engineering, chemical engineering, materials science, etc.
|
|
2
|
Fine Chemical Industry Separation and clarification of small batches of materials, catalyst recovery, small-scale solid-liquid separation tests for reaction products.
|
|
3
|
Food and Beverage Industry Clarification and filtration of syrups, juices, alcoholic beverages, solid-liquid separation process verification for food raw materials.
|
|
4
|
Environmental Protection and Water Treatment Field Small-scale tests for sludge dewatering, pre-treatment of high-concentration wastewater, and water purification filtration testing.
|
|
5
|
New Materials Research Solid-liquid separation and particle size classification experiments for new energy slurries and nanomaterial suspensions.
|
|
6
|
Mining and Metallurgical Small-scale Tests Solid-liquid separation of low-concentration mineral slurries, dehydration and filtration tests for post-mining materials.
|
Q: Are you manufacturer?
A: Yes. We are experienced manufacturer of filter equipment.
Q:What products you provide?
A: We produce more than 200 different models of the filter. The main products are the Press Filter/Bag Filter Housing/Automatic self cleaning filter/Basket filter/Magnetic filter/ Candle filter/Leaf filter/Cartridge filter housing/Filter Plate/Filter Cloth/Filter Cartridge /Filter Bag, also matched tanks, conveyors, etc.
Q: How to select the type you needed?
A: We will ask you some information: solid liquid kind, usage, flow rate, solid content
percentage, working temperature & pressure, etc. We have professional technical team which will work together with our sales to help you choose the suitable machine for you.
Q. Is it easy to operate for the new user ?
R. A: Yes. We offer you manual book and operating video. When you have any questions during using, we will answer you within 24 hours. For large projects, we can also send our engineers to your site for commissioning and training.
Q: What's MOQ?
A: 1 PCS.
Q: Do you accept OEM?
A: Yes.
Q:Quality Warranty.
A:12 months after the installation and commission or 18 months after it has been delivered to the site of the customer.